What is the difference between Class A and Class B asbestos removal in Brisbane?

Class A removal permits the extraction of friable (crumbly/powdery) asbestos such as pipe lagging, sprayed insulation, and millboard under negative pressure enclosures. Class B removal is licensed for bonded/non-friable materials like fibro sheeting, Super Six roofing, and vinyl tiles.

Do I need a clearance certificate after asbestos removal in Queensland?

Yes. Under Section 473 of the QLD Work Health and Safety Regulation 2011, any removal of more than 10 square metres of non-friable asbestos, or any quantity of friable asbestos, legally requires an independent visual inspection and written clearance certificate prior to re-occupancy.

Licensed Asbestos Removal Brisbane | A & B Class Hazmat

Direct Summary: Brisbane Asbestos Removal Compliance

✓ Licensing Requirement: Any removal exceeding 10m² of bonded asbestos in Queensland must be performed by a licensed Class B removalist. Friable asbestos mandates a Class A license.

✓ Builder Synergy: As a Licensed Removalists & Compliance Specialists, Alliance Group removes asbestos and immediately executes modern structural reinstatement (roofing, framing, lining).

✓ Statutory Clearance: Every project concludes with an independent visual and atmospheric clearance certificate under WHS Regulation 2011 s473.

Complete Asbestos Removal Solutions in Brisbane

With over 60% of Brisbane's residential and commercial buildings constructed prior to 1990 containing asbestos-containing materials (ACM), safe and licensed removal is a vital safety and legal requirement. Alliance Group provides end-to-end hazard containment, licensed transport, and certified disposal.

⚖ Queensland Statutory Reference

Under the Work Health and Safety Regulation 2011 (Qld) and the Code of Practice: How to Safely Remove Asbestos 2021, duty holders must ensure asbestos removalists hold active WorkSafe QLD licenses, establish strict exclusion zones, and manifest all waste to EPA-approved facilities.

Our Brisbane Removal Capabilities

Material Type	Typical Locations	License Required	Alliance Group Protocol
Bonded Fibro Sheeting	Eaves, wet areas, external claddings, garages	Class B	HEPA shadow vacuuming, PVA encapsulation, zero-breakage extraction.
Super Six Corrugated Roofing	Warehouses, sheds, residential roofs	Class B	Fall-arrest rigging, full panel unbolting, direct crane lifting & Colorbond replacement.
Vinyl Underlays & Tiles	Kitchens, commercial tenancies, corridors	Class B	Floor scraping with dust suppressant and HEPA floor grinding.
Friable Insulation & Lagging	Boilers, pipework, ceiling cavities, plant rooms	Class A	Full negative pressure bubble containment, continuous air monitoring, decontamination airlocks.

Brisbane Service Coverage Area

We provide rapid response and scheduled removal across all Brisbane regions:

Brisbane Inner & CBD

Brisbane City, Fortitude Valley, Spring Hill, South Brisbane, Milton, New Farm, Paddington.

North Brisbane

Chermside, Aspley, Strathpine, Stafford, Nundah, Lutwyche, Albany Creek, Bridgeman Downs.

South Brisbane & Logan Border

Mount Gravatt, Sunnybank, Coorparoo, Carindale, Annerley, Acacia Ridge, Underwood.

Western Suburbs & Centenary

Indooroopilly, Toowong, Kenmore, Chapel Hill, Jindalee, Mount Ommaney, Fig Tree Pocket.

Frequently Asked Questions

How much does asbestos removal cost in Brisbane?

Costs depend on accessibility, quantity, and material type. Small residential eaves or bathroom removals typically range from $850 to $2,500 + GST, while larger roof replacements or commercial fitouts are priced via custom on-site scope. Contact us for an upfront, fixed-price quote.

Can you replace the roof or walls after removing the asbestos?

Yes. Because Alliance Group is a Licensed Removalists & Compliance Specialists, we provide complete turn-key reconstruction—installing modern Colorbond roofing, timber/steel framing, insulation, and plasterboard linings.